Tag Archives: hollow gearbox

China Good quality H Series Hollow Shaft Parallel Helical Gearbox cycloidal drive gear ratio

Product Description

PROFESSIONAL MANUFACTURE
— SINCE 1995

H Series Hollow Shaft Parallel Helical Gearbox

Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light

industry,environmental protection, paper making, printing, lifting transport, food industry and so on.

Main Series Product: R series helical gear motor reducer, K series spiral bevel gear reducer, NGW, P series planetary gear reducer, H B series helical gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gearbox reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloidal speed reducer, etc. Meanwhile, map sample processing business can be undertaken.

Product Description

 

Realized parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes.

Using less component parts.

Applying advanced grinding process which improved the stability and the efficiency of transmit power with lower noise.

Mounting mode:foot-mounted,flange-mounted,swing base-mounted,torque-arm-mounted.

Ratio range:1.23~450. It will be higher when combining with K&R series reducer.

Product Parameters

 

Type

Input Speed r/min

Transmission Ratio

Type

Input Speed

r/min

Transmission Ratio

Type

Input Speed

r/min

Transmission Ratio

 

 

 

H1SH3/5/7/
9/11
/13/15
/17/19

 

750

1.25-2

 

B2SH H2SH4/5/6/7/
8/9/10/
11/12/13/14/15/
16/17/18/19/
20/21/22
/23/24/25/26

 

750

5-9

 

 

B3SH H3SH4/5/6/7/8
/9/10/11/12/
13/14/15/
16/17/18/19/
20/21/22/
23/24/25/26

 

750

 

12.5-112

224-5.6

10-28

 

1000

1.25-2

 

1000

5-9

 

1000

 

12.5-112

2.24-5.6

10-28

 

1500

1.25-2

 

 

1500

5-6.3

 

1500

12.5-31.5

4-5.6

7-9

35.5-56

 

 

10-16

63-112

18-28

 

 

Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. industrial helical gearbox. H PV series High quality Right Angle Unique speed reducer HB helical gearbox / gear box.

Detailed Photos


Chinese Speed Reducer/industrial helical gearbox is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.

In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.

 

Packaging & Shipping

 

Application

 

Driven machines
Waste water treatment Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps Dredgers Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears
Chemical industry Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges Metal working mills plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CZPT mills
Metal working mills Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives Conveyors Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears
Frequency converters Reciprocating compressors
Cranes Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes Cooling towers Cooling tower fans, blowers axial and radial
Cane sugar production Cane knives, cane mills Beet sugar production Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter
Paper machines Pulper drives Cableways Material ropeways, continuous ropeway
Cement industry Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers    

Company Profile

 

Established in 1995 , HangZhou Boji Machinery is a professional manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. We are located in HangZhou of ZheJiang Province, with convenient transportation access. With our own brand “TianQi”, all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
Besides, In 2005,we attained ISO9001 certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network CZPT South America, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and other countries and regions.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look CZPT to speaking with you to future discuss how we can be of service to you.

FAQ

1. Who are we?
We are the Factory, with over 25 years of production experience, based in ZheJiang , China, start from 1995,sell to Domestic Market(50.00%),Mid East(10.00%),Southeast Asia(10.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),North America(3.00%),Africa(2.00%),Southern Europe(2.00%),South Asia(2.00%),Central America(1.00%).

2. Can you customize according to our requirements?
Yes, we can design nonstandard products according to customer’s drawing and sample.

3.What can you buy from us?
speed reducer,gearbox,gear motor,pump,crusher

4. Why should you buy from us not from other suppliers?
Founded in 1995, with over 20 years of production experience and credibility. With professional engineer team, advanced technology production and skilled workers.Specialized in the production of reducer. Map sample processing business can be undertaken.

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

 

Application: Motor, Machinery, Manufacturing Plant
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|

Order Sample

H Series Hollow Shaft Parallel Helical Gearbox
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

helical gearbox

How to Calculate Transmission Ratio for a Cycloidal Gearbox

Using a cycloidal gearbox can be very useful in a wide variety of situations. However, it’s important to understand how to use it properly before implementing it. This article discusses the benefits of using a cycloidal gearbox, how to calculate the transmission ratio, and how to determine the effects of dynamic and inertial forces on the gearbox.

Dynamic and inertial effects

Various studies have been done to study the dynamic and inertial effects of cycloidal gearboxes. These studies have been performed using numerical, analytical and experimental methods. Depending on the nature of the load and its distribution along the gear, a variety of models have been developed. These models use finite element method to determine accurate contact stresses. Some of these models have been developed to address the nonlinear elasticity of contacts.
Inertial imbalance in a cycloidal gearbox causes vibration and can affect the efficiency of the device. This can increase mechanical losses and increase wear and tear. The efficiency of the device also depends on the torque applied to the cycloidal disk. The effectiveness of the device increases as the load increases. Similarly, the nonlinear contact dynamics are also associated with an increase in efficiency.
A new model of a cycloidal reducer has been developed to predict the effects of several operational conditions. The model is based on rigid body dynamics and uses a non-linear stiffness coefficient. The model has been validated through numerical and analytical methods. The model offers drastic reduction in computational costs. The model allows for a quick analysis of several operational conditions.
The main contribution of the paper is the investigation of the load distribution on the cycloidal disc. The study of this aspect is important because it allows for an analysis of the rotating parts and stresses. It also provides an indication of which gear profiles are best suited for optimizing torque transmission. The study has been conducted with a variety of cycloidal gearboxes and is useful in determining the performance of different types of cycloidal gearboxes.
To study the load distribution on the cycloidal disc, the authors investigated the relationship between contact force, cycloidal gearboxes and different gear profiles. They found that the non-linear contact dynamics have a large impact on the efficiency of a cycloidal gearbox. The cycloidal gearbox is an ideal solution for applications that involve highly dynamic servos. It can also be used in machine tool applications and food processing industries.
The study found that there are three common design principles of cycloidal reducers. These are the contact force distribution, the speed reduction and the trochoidal profile of the cycloidal disc. The trochoidal profile has to be defined carefully to ensure correct mating of the rotating parts. The trochoidal profile provides an indication of which gear profiles are best for optimizing torque transmission. The contact force distribution can be improved by refining the mesh along the disc’s width.
As the input speed increases, the efficiency of the reducer increases. This is because contact forces are constantly changing in magnitude and orientation. A cycloidal reducer with a one tooth difference can reduce input speed by up to 87:1 in a single stage. It also has the ability to handle high-cycle moves without backlash.helical gearbox

Transmission ratio calculation

Getting the correct transmission ratio calculation for a cycloidal gearbox requires a good understanding of what a gearbox is, as well as the product that it is being used for. The correct ratio is calculated by dividing the output speed of the output gear by the input speed of the input gear. This is usually accomplished by using a stopwatch. In some cases, a catalog or product specification may be required. The correct ratio is determined by a combination of factors, such as the amount of torque applied to the mechanism, as well as the size of the gears involved.
A cycloidal gear is a type of gear tooth profile that can be represented using a spline. It is also possible to model a gear with a cycloidal profile by using a spline to connect points against the beginning of a coordinate system. This is important in the design and functionality of a gear.
There are many different gears used in machines and devices. These include the herringbone gear, the helical gear and the spiral bevel gear. The best transmission ratios are typically obtained with a cycloidal gearbox. In addition to ensuring the accuracy of positioning, a cycloidal gearbox provides excellent backlash. Cycloid gears have a high degree of mechanical efficiency, low friction, and minimal moment of inertia.
A cycloidal gearbox is often referred to as a planetary gearbox, though it is technically a single-stage gearbox. In addition to having a ring gear, the gearbox has an eccentric bearing that drives the cycloidal disc in an eccentric rotation. This makes the cycloidal gearbox a good choice for high gear ratios in compact designs.
The cycloid disc is the key element of a cycloidal gearbox. The cycloid disc has n=9 lobes, and each lobe of the disc moves by a lobe for every revolution of the drive shaft. The cycloid disc is then geared to a stationary ring gear. The cycloidal disc’s lobes act like teeth on the stationary ring gear.
There are many different gears that are classified by the profile of the gear teeth. The most common gears are the involute and helical gears. Most motion control gears include spur designs. However, there are many other types of gears that are used in various applications. The cycloidal gear is one of the more complicated gears to design. The cycloid disc’s outline can be represented using markers or smooth lines, though a scatter chart will also do.
The cycloid disc’s lobes rotate on a reference pitch circle of pins. These pins rotate 40 deg during the eccentric rotation of the drive shaft. The pins rotate around the disc to achieve a steady rotation of the output shaft.
The cycloid disc’s other obvious, and possibly more important, feature is the’magic’ number of pins. This is the number of pins that protrude through the face of the disc. The disc has holes that are larger than the pins. This allows the pins to protrude through the disc and attach to the output shaft.helical gearbox

Application

Whether you’re building a robot drive or you’re simply looking for a gearbox to reduce the speed of your vehicle, a cycloidal gearbox is a great way to achieve a high reduction ratio. Cycloidal gearboxes are a low-friction, lightweight design that has an extremely stable transmission. They are suitable for industrial robots and can be used in many applications, including positioning robots.
Cycloidal gearboxes reduce speed by using eccentric motion. The eccentric motion enables the entire internal gear to rotate in wobbly cycloidal motion, which is then translated back into circular rotation. This eliminates the need for stacking gear stages. Cycloidal gearboxes also have less friction, higher strength, and greater durability than conventional gearboxes.
The cycloidal gearbox is also used in a number of applications, including marine propulsion systems, and robot drives. Cycloidal gearboxes reduce vibration by using offset gearing to cancel out vibrations.
Cycloidal gears have lower friction, higher strength, and better torsional stiffness than involute gears. They also have a reduced Hertzian contact stress, making them better than involute gears for use with shock loads. They also have a smaller size and weight than conventional gearboxes, and they have a higher reduction ratio than involute gears.
Cycloidal gears are typically used to reduce the speed of motors, but they also offer a number of other advantages. Cycloidal gearboxes have a smaller footprint than other gearboxes, allowing them to fit into confined spaces. They also have low backlash, allowing for precise movement. Cycloidal gears have a higher efficiency, resulting in lower power requirements and lower wear.
The cycloidal disc is one of the most important components of the gearbox. Cycloidal discs are normally designed with a short cycloid, which minimizes the eccentricity of the disc. They are also designed with a shortened flank, resulting in better strength and less stress concentration. Cycloidal discs are typically geared to a stationary ring gear. The cycloid is designed to roll around the stationary ring pins, which push against the circular holes in the disc. Cycloidal gearboxes typically employ two degrees of shift.
Cycloidal drives are ideal for heavy load applications. They also have high torsional stiffness, which makes them highly resistant to shock loads. Cycloidal drives also offer a high reduction ratio, which can be achieved without the need for a large input shaft. They are also compact and have a high service life.
The output shaft of a cycloidal gearbox always has two degrees of shifting, which ensures that the input and output shafts always rotate at a different speed. The output shaft would be a pin casing around the drive disks, which would also allow for easy maintenance.
Cycloidal gearboxes are also very compact and lightweight, so they are ideal for use in industrial robots. The cycloidal gearbox reducer is the most stable, low-vibration reducer in industrial robots, and it has a wide transmission ratio range.
China Good quality H Series Hollow Shaft Parallel Helical Gearbox   cycloidal drive gear ratioChina Good quality H Series Hollow Shaft Parallel Helical Gearbox   cycloidal drive gear ratio
editor by CX 2023-11-09

China best 15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox cvt gearbox

Product Description

15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox 

Model:10CBX-RVC

More Code And Specification:

E series C series
Code Outline dimension  General model Code Outline dimension The original code
120 Φ122 6E 10C Φ145 150
150 Φ145 20E 27C Φ181 180
190 Φ190 40E 50C Φ222 220
220 Φ222 80E 100C Φ250 250
250 Φ244 110E 200C Φ345 350
280 Φ280 160E 320C Φ440 440
320 Φ325 320E 500C Φ520 520
370 Φ370 450E      

Gear ratio And Specification

E Series C Series
Code Reduction Ratio New code  Monomer reduction ratio
120 43,53.5,59,79,103 10CBX 27.00
150 81,105,121,141,161 27CBX 36.57
190 81,105,121,153 50CBX 32.54
220 81,101,121,153 100CBX 36.75
250 81,111,161,175.28 200CBX 34.86
280 81,101,129,145,171 320CBX 35.61
320 81,101,118.5,129,141,171,185 500CBX 37.34
370 81,101,118.5,129,154.8,171,192.4    
Note 1: E series,such as by the shell(pin shell)output,the corresponding reduction ratio by 1
Note 2: C series gear ratio refers to the motor installed in the casing of the reduction ratio,if installed on the output flange side,the corresponding reduction ratio by 1

Reducer type code
REV: main bearing built-in E type
RVC: hollow type
REA: with input flange E type
RCA: with input flange hollow type

Application:

Company Information

FAQ
Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

Please contact us if you have detailed requests, thank you !

 

Application: Machinery, Robotic
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step
Customization:
Available

|

Customized Request

cycloidal gearbox

Calculation of Reduction Ratio in a Cycloidal Gearbox

The reduction ratio in a cycloidal gearbox can be calculated using the following formula:

Reduction Ratio = (Number of Input Pins + Number of Output Pins) / Number of Output Pins

In a cycloidal gearbox, the input pins engage with the lobes of the cam disc, while the output pins are engaged with the cycloidal pins of the output rotor. The reduction ratio determines the relationship between the number of input and output pins engaged at any given time.

For example, if a cycloidal gearbox has 7 input pins and 14 output pins engaged, the reduction ratio would be:

Reduction Ratio = (7 + 14) / 14 = 1.5

This means that for every 1 revolution of the input pins, the output rotor will complete 1.5 revolutions. The reduction ratio is a key parameter that influences the output speed and torque of the cycloidal gearbox.

cycloidal gearbox

Use of Cycloidal Gearboxes in Precision Applications

Cycloidal gearboxes are well-suited for precision applications due to their unique design and capabilities. Here’s why they are used in precision settings:

  • High Positional Accuracy: Cycloidal gearboxes offer high positional accuracy, making them suitable for applications that require precise positioning and movement.
  • Backlash Reduction: The design of cycloidal gearboxes minimizes backlash, ensuring that there is minimal play between gears. This is crucial for maintaining accuracy in precision applications.
  • Smooth and Controlled Motion: Cycloidal gearboxes provide smooth and controlled motion with minimal vibration, which is essential for delicate operations and precision machinery.
  • Compact Design: Their compact design allows cycloidal gearboxes to be integrated into tight spaces without sacrificing performance. This is especially valuable in applications where space is limited.
  • Repeatable Performance: Cycloidal gearboxes offer consistent and repeatable performance, which is vital for maintaining precision over multiple cycles.
  • Low Backlash: The low backlash characteristic of cycloidal gearboxes ensures that there is minimal lost motion, contributing to their precision performance.
  • High Torque Density: Despite their compact size, cycloidal gearboxes can handle high torque loads, making them suitable for applications that require both precision and power.
  • Reduced Wear: The rolling contact design of cycloidal gears reduces wear and extends the lifespan of the gearbox, which is crucial for precision applications that demand consistent performance over time.

Overall, cycloidal gearboxes are a reliable choice for precision applications that require accurate positioning, controlled motion, and consistent performance.

cycloidal gearbox

What is a Cycloidal Gearbox?

A cycloidal gearbox, also known as a cycloidal drive, is a type of gearing mechanism that utilizes the principle of cycloidal motion for power transmission. It consists of several components, including a high-speed input shaft, a set of cycloidal pins or rollers, and an outer stationary ring with lobed profiles.

The operation of a cycloidal gearbox involves a unique mechanism:

  1. Input Shaft: The high-speed input shaft is connected to the driving source, such as an electric motor. It transfers rotational motion to the cycloidal pins.
  2. Cycloidal Pins or Rollers: These pins or rollers are typically arranged around the input shaft in a circular pattern. As the input shaft rotates, the cycloidal pins also rotate, causing them to engage with the lobes on the outer stationary ring.
  3. Outer Stationary Ring: The outer ring has lobed profiles, and it remains stationary during operation. The lobes of the outer ring interact with the cycloidal pins or rollers, causing them to move in a unique motion known as epicycloidal or hypocycloidal motion.

The interaction between the cycloidal pins and the lobed profiles of the outer ring results in smooth and controlled motion transmission. The mechanism provides advantages such as high torque capacity, compact size, and precise positioning capabilities.

Cycloidal gearboxes are widely used in various applications, including robotics, automation, packaging machinery, and other industrial systems where high torque, precision, and compact design are essential.

China best 15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox   cvt gearbox	China best 15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox   cvt gearbox
editor by CX 2023-10-16

China factory 15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox automatic gearbox

Product Description

15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox 

Model:10CBX-RVC

More Code And Specification:

E series C series
Code Outline dimension  General model Code Outline dimension The original code
120 Φ122 6E 10C Φ145 150
150 Φ145 20E 27C Φ181 180
190 Φ190 40E 50C Φ222 220
220 Φ222 80E 100C Φ250 250
250 Φ244 110E 200C Φ345 350
280 Φ280 160E 320C Φ440 440
320 Φ325 320E 500C Φ520 520
370 Φ370 450E      

Gear ratio And Specification

E Series C Series
Code Reduction Ratio New code  Monomer reduction ratio
120 43,53.5,59,79,103 10CBX 27.00
150 81,105,121,141,161 27CBX 36.57
190 81,105,121,153 50CBX 32.54
220 81,101,121,153 100CBX 36.75
250 81,111,161,175.28 200CBX 34.86
280 81,101,129,145,171 320CBX 35.61
320 81,101,118.5,129,141,171,185 500CBX 37.34
370 81,101,118.5,129,154.8,171,192.4    
Note 1: E series,such as by the shell(pin shell)output,the corresponding reduction ratio by 1
Note 2: C series gear ratio refers to the motor installed in the casing of the reduction ratio,if installed on the output flange side,the corresponding reduction ratio by 1

Reducer type code
REV: main bearing built-in E type
RVC: hollow type
REA: with input flange E type
RCA: with input flange hollow type

Application:

Company Information

FAQ
Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

Please contact us if you have detailed requests, thank you !

 

Application: Machinery, Robotic
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step
Customization:
Available

|

Customized Request

cycloidal gearbox

Suitability of Cycloidal Gearboxes for High-Torque Applications

Cycloidal gearboxes are well-suited for high-torque applications due to their unique design and mechanical advantages. Here’s why they are suitable:

  • Multiple Engagement Points: Cycloidal gearboxes have multiple teeth in contact at any given moment, distributing the load over a larger area. This reduces wear and stress on individual teeth, making them capable of handling high torque.
  • High Load-Carrying Capacity: The design of the cycloidal mechanism, with its large number of pins and rollers, provides high load-carrying capacity. This makes them capable of transmitting significant torque without failure.
  • Tight Tolerances: The precision and tight tolerances in the construction of cycloidal gearboxes ensure smooth and efficient power transmission even under heavy loads.
  • Compact Design: Cycloidal gearboxes achieve high torque in a relatively compact size. This is particularly advantageous in applications where space is limited.
  • High Gear Ratio: Cycloidal gearboxes can achieve high gear ratios, allowing them to convert lower input speeds into higher output torque, which is essential in high-torque applications.

These factors make cycloidal gearboxes a reliable choice for various high-torque applications across industries such as heavy machinery, robotics, material handling, and more.

cycloidal gearbox

Safety Measures for Operating Cycloidal Gear Systems

Operating cycloidal gear systems requires careful attention to safety to prevent accidents and ensure the well-being of operators and personnel. Here are important safety measures to consider:

  • Training: Provide proper training to operators and maintenance personnel on the operation, maintenance, and potential hazards associated with cycloidal gear systems.
  • Protective Equipment: Operators should wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and protective clothing.
  • Lockout-Tagout: Implement lockout-tagout procedures to ensure that the system is de-energized and isolated before any maintenance or repair work begins.
  • Regular Inspections: Conduct routine inspections of the gear system to identify any signs of wear, damage, or abnormalities that could compromise safety or performance.
  • Lubrication: Follow the manufacturer’s recommendations for lubrication to maintain optimal performance and prevent overheating.
  • Temperature Monitoring: Install temperature sensors or monitoring devices to detect any excessive heat buildup in the gearbox, which could indicate a potential issue.
  • Proper Ventilation: Ensure that the area where the gear system operates is well-ventilated to prevent the accumulation of heat or harmful fumes.
  • Emergency Stop: Install emergency stop buttons or switches that can immediately shut down the system in case of an emergency.
  • Clearance Zones: Establish clear clearance zones around the gear system to prevent accidental contact with moving parts.
  • Regular Maintenance: Follow a scheduled maintenance routine to keep the gear system in optimal working condition and address any potential safety concerns.
  • Operator Awareness: Ensure that operators are aware of the gear system’s potential hazards and safe operating practices.
  • Warning Signage: Clearly mark areas where the gear system operates with appropriate warning signs and labels.
  • Emergency Procedures: Develop and communicate clear emergency procedures to respond to accidents, malfunctions, or other unexpected events.

Prioritizing safety in the operation and maintenance of cycloidal gear systems is essential to prevent injuries and maintain a safe working environment.

cycloidal gearbox

How Does a Cycloidal Gearbox Work?

A cycloidal gearbox operates on the principle of cycloidal motion to transmit rotational power. It consists of a set of components that work together to achieve smooth and efficient motion transmission:

  1. High-Speed Input Shaft: The gearbox is connected to a high-speed input shaft, typically driven by an electric motor or another power source.
  2. Cycloidal Pins or Rollers: Surrounding the input shaft are a series of cycloidal pins or rollers arranged in a circular pattern. These pins interact with the lobed profiles of the outer stationary ring.
  3. Outer Stationary Ring: The outer ring remains stationary and contains lobed profiles. The lobes are designed in a way that allows them to engage with the cycloidal pins as they rotate.
  4. Motion Transmission: As the input shaft rotates, it causes the cycloidal pins to move along the circular path. The interaction between the cycloidal pins and the lobed profiles of the outer ring results in a unique motion known as epicycloidal or hypocycloidal motion.

This motion generates torque that is transferred from the input shaft to the output shaft of the gearbox. The main advantage of a cycloidal gearbox is its ability to provide high torque output in a compact design. The multiple points of contact between the pins and the lobes distribute the load, enhancing the gearbox’s load-carrying capacity.

Cycloidal gearboxes are known for their smooth and controlled motion, making them suitable for applications requiring precise positioning and high torque capabilities, such as robotics, automation, and industrial machinery.

China factory 15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox   automatic gearbox	China factory 15r/m 0.2KW More Than 6000hr Life Time 10C BX RVC Series Hollow Type Mounted High Precision Cycloidal Gearbox   automatic gearbox
editor by CX 2023-10-12

China High Torque Hollow Shaft Reducer Compact RV Cycloidal Pin Wheel Gearbox for Robot Joints Nabtesco RV Gearbox with high quality

Solution Description

Information Images:

one. Hollow system, which can insert cables inside the reducer, so as to understand the room-conserving design and style of the gadget
2. Developed-in mechanism of the major bearing: the reliability is enhanced and the complete expense is reduced
3. Angular contact ball bearings are set up, so they can assistance external hundreds. Due to the fact of its large rigidity and large second bearing potential, it can be used to rotating shafts It can minimize the number of elements necessary Effortless set up
4.2-stage reduction system: tiny vibration, tiny gD2, the slow revolution velocity of RV gear, lowered vibration, lowered motor direct junction (input equipment), and inertia
5. Double column assist mechanism: high torsional rigidity Powerful effect resistance (five hundred% of rated torque) The crankshaft can be supported by 2 columns
six. Rolling speak to system: exceptional starting effectiveness Modest wear and prolonged services life Modest backlash (1arc. Min.) Use of rolling bearings
7. Needle equipment mechanism: little backlash (1arc. Min.), robust effect resistance (five hundred% of rated torque), and much more simultaneous meshing of RV gear and needle teeth

Benefits:
one. Large torsional rigidity, high torque
2. Focused complex personnel can be on the go to offer style solutions
3. Factory direct income fantastic workmanship tough high quality assurance
4. Product top quality troubles have a 1-yr warranty time, can be returned for substitute or mend

Firm profile:

HangZhou CZPT Technological innovation Co., Ltd. was recognized in 2014. Primarily based on extended-phrase accrued expertise in mechanical layout and production, various varieties of harmonic reducers have been produced according to the diverse wants of buyers. The company is in a stage of fast development. , Equipment and personnel are constantly growing. Now we have a group of experienced technological and managerial staff, with sophisticated equipment, comprehensive screening techniques, and merchandise production and design capabilities. Item layout and production can be carried out in accordance to consumer demands, and a selection of large-precision transmission components such as harmonic reducers and RV reducers have been shaped the goods have been bought in domestic and world-wide(This kind of as Usa, Germany, Turkey, India) and have been utilized in industrial robots, device resources, medical products, laser processing, cutting, and dispensing, Brush producing, LED tools producing, precision digital equipment, and other industries have set up a excellent status.
In the long term, Hongwing will adhere to the purpose of gathering abilities, maintaining near to the marketplace, and technological innovation, carry ahead the price pursuit in the area of harmonic generate&RV reducers, seek the frequent development of the company and the modern society, and quietly create alone into a effectively-recognized brand with unbiased intellectual residence rights. Good quality supplier in the subject of precision transmission”.

Toughness manufacturing unit:

Our plant has an complete campus The quantity of workshops is all around three hundred Whether or not it’s from the production of uncooked materials and the procurement of raw materials to the inspection of concluded goods, we are undertaking it ourselves. There is a comprehensive production system

HST-I Parameter:

Score table
Output velocity (rpm) 5 10 fifteen 20 twenty five 30 40 50 sixty
Model Speed ratio code R
Pace ratio
Output torque (nm)
Enter potential (kw)
Axis rotation Shell rotation
RV-10C 27 27 26 136
/ .09
111
/ .sixteen
ninety eight
/ .21
90
/ .25
eighty four
/ .29
80
/ .34
73
/ .41
sixty eight
/ .forty seven
sixty five
/ .54
RV-27C 36.57 1,390/38 1352/38 368
/ .26
299
/ .forty two
265
/ .fifty five
243
/ .68
227
/ .seventy nine
215
/ .90
197
/ 1.10
184
/ 1.29
174
/ 1.46
RV-50C 32.fifty four 1,985/61 1924/61 681
/ .48
554
/ .seventy seven
490
/ 1.03
450
/ 1.26
420
/ 1.forty seven
398
/ 1.67
366
/ 2.04
341
/ 2.38
 
RV-100C 36.seventy five 36.seventy five 35.seventy five 1,362
/ .ninety five
one,107
/ 1.55
980
/ 2.05
899
/ 2.51
841
/ 2.ninety four
796
/ 3.33
730
/ 4.08
   
RV-200C 34.86 one,499/forty three 1456/43 2,724
/ 1.90
2,215
/ 3.09
1,960
/ 4.11
one,803
/ 5.04
1,686
/ 5.88
one,597
/ 6.69
     
RV-320C 35.sixty one two,778/78 2700/seventy eight 4,361
/ 3.04
3,538
/ 4.94
3,136
/ 6.57
2,881
/ 8.05
two,690
/ 9.forty one
       
RV-500C 37.34 3,099/83 3016/eighty three 6,811
/ 4.seventy five
5,537
/ 7.73
four,900
/ 10.26
four,498
/ 12.fifty six
         
Be aware: 1. The allowable output velocity is influenced by obligation cycle, load, and ambient temperature. When the allowable output pace is over NS1, please seek the advice of our organization about the safety measures.
2. Calculate the input capability (kW) by the pursuing formula.
Input ability (kW)=2π*N*T/sixty*η/one hundred*ten*ten*10 N: output speed (RPM)
T: output torque (nm)
η =  seventy five: reducer effectiveness (%)
The enter potential is the reference value.
three. When making use of the reducer at a lower temperature, the no-load working torque will enhance, so remember to pay out focus when selecting the motor.
(refer to minimal-temperature qualities)

T0
Rated torque
(note. 7)
N0
Rated output speed
K
Rated life
TS1
Allowable starting up and stopping torque
TS2
Instantaneous greatest allowable torque
NS0
Allowable highest output speed
(Observe 1)
Backlash Empty assortment MAX. Angle transfer Error MAX. Commence effectiveness signifies the worth MO1
MO1. Permissible instant (Be aware.4)
MO2
Momstant moment Permissible second
Wr
Allowable radial load (Notice.9)
I
Transformed price of inertia instant input shaft
(note. 5)
Second of inertia I
(I = GD2 / 4) regular centre gear
weight
(Nm) (rpm) (h) (Nm) (Nm) (r/min) (arc.sec.) (arc.min.) (arc.sec.) (%) (Nm) (Nm) (N) (kgm2) (kgm2) (kg)
98 15 six,000 245 490 eighty 1. one. 70 seventy five 686 one,372 five,755 one.38×10-five .678×10-three four.6
264.six fifteen 6,000 662 1,323 sixty 1. 1. 70 80 980 1,960 6,520 .550×10-4 .563×10-3 eight.five
490 15 6,000 1,225 Bolt fastening 2,450 50 1. 1. 60 75 1,764 3,528 9,428 1.82×10-4 0.363×10-two 14.6
By way of-hole bolt fastening 1,960
980 15 6,000 2,450 Bolt fastening 4,900 40 1. 1. 50 80 2,450 4,900 11,802 0.475×10-3 0.953×10-two 19.five
By means of-hole bolt fastening 3,430
1,960 15 6,000 4,900 Bolt fastening 9,800 30 1. 1. 50 80 8,820 17,640 31,455 1.39×10-3 1.94×10-2 55.6
Via-gap bolt fastening 7,350
3,136 fifteen six,000 seven,840 15,680 twenty five 1. one. fifty 85 20,580 39,two hundred 57,087 .518×10-two .405×10-1 seventy nine.5
4,900 fifteen 6,000 twelve,250 24,500 twenty one. one. fifty eighty 34,300 78,four hundred eighty two,970 .996×10-2 one.014×10-1 154
 
4. The allowable torque will fluctuate according to the thrust load. You should validate by the allowable second line diagram.
five. For second stiffness and torsion stiffness, make sure you refer to the inclination angle and torsion angle calculation.
six. Rated torque refers to the torque price reflecting the rated existence at rated output pace, not the knowledge exhibiting the higher limit of load. Remember to refer to the glossary (p.eighty one) and item choice circulation chart (p.82).
7. The above specifications are attained in accordance to the company’s evaluation technique. Please confirm that the merchandise fulfills the use situations of carrying real aircraft ahead of use.
eight. When the radial load is inside dimension B, please use it inside of the allowable radial load range.

Purposes:

FQA:
Q: What ought to I give when I choose a gearbox/speed reducer?
A: The ideal way is to supply the motor drawing with parameters. Our engineer will check out and advocate the most suitable gearbox model for your reference.
Or you can also offer the underneath specification as nicely:
1) Sort, design, and torque.
2) Ratio or output velocity
3) Functioning situation and link method
four) Good quality and put in machine identify
five) Input method and enter pace
6) Motor model product or flange and motor shaft size
 

US $620-1,300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 600/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Rating table
Output speed (rpm) 5 10 15 20 25 30 40 50 60
Model Speed ratio code R
Speed ratio
Output torque (nm)
Input capacity (kw)
Axis rotation Shell rotation
RV-10C 27 27 26 136
/ 0.09
111
/ 0.16
98
/ 0.21
90
/ 0.25
84
/ 0.29
80
/ 0.34
73
/ 0.41
68
/ 0.47
65
/ 0.54
RV-27C 36.57 1,390/38 1352/38 368
/ 0.26
299
/ 0.42
265
/ 0.55
243
/ 0.68
227
/ 0.79
215
/ 0.90
197
/ 1.10
184
/ 1.29
174
/ 1.46
RV-50C 32.54 1,985/61 1924/61 681
/ 0.48
554
/ 0.77
490
/ 1.03
450
/ 1.26
420
/ 1.47
398
/ 1.67
366
/ 2.04
341
/ 2.38
 
RV-100C 36.75 36.75 35.75 1,362
/ 0.95
1,107
/ 1.55
980
/ 2.05
899
/ 2.51
841
/ 2.94
796
/ 3.33
730
/ 4.08
   
RV-200C 34.86 1,499/43 1456/43 2,724
/ 1.90
2,215
/ 3.09
1,960
/ 4.11
1,803
/ 5.04
1,686
/ 5.88
1,597
/ 6.69
     
RV-320C 35.61 2,778/78 2700/78 4,361
/ 3.04
3,538
/ 4.94
3,136
/ 6.57
2,881
/ 8.05
2,690
/ 9.41
       
RV-500C 37.34 3,099/83 3016/83 6,811
/ 4.75
5,537
/ 7.73
4,900
/ 10.26
4,498
/ 12.56
         
Note: 1. The allowable output speed is affected by duty cycle, load, and ambient temperature. When the allowable output speed is above NS1, please consult our company about the precautions.
2. Calculate the input capacity (kW) by the following formula.
Input capacity (kW)=2π*N*T/60*η/100*10*10*10 N: output speed (RPM)
T: output torque (nm)
η =  75: reducer efficiency (%)
The input capacity is the reference value.
3. When using the reducer at a low temperature, the no-load running torque will increase, so please pay attention when selecting the motor.
(refer to low-temperature characteristics)

###

T0
Rated torque
(note. 7)
N0
Rated output speed
K
Rated life
TS1
Allowable starting and stopping torque
TS2
Instantaneous maximum allowable torque
NS0
Allowable maximum output speed
(Note 1)
Backlash Empty range MAX. Angle transfer Error MAX. Start efficiency represents the value MO1
MO1. Permissible moment (Note.4)
MO2
Momstant moment Permissible moment
Wr
Allowable radial load (Note.9)
I
Converted value of inertia moment input shaft
(note. 5)
Moment of inertia I
(I = GD2 / 4) standard center gear
weight
(Nm) (rpm) (h) (Nm) (Nm) (r/min) (arc.sec.) (arc.min.) (arc.sec.) (%) (Nm) (Nm) (N) (kgm2) (kgm2) (kg)
98 15 6,000 245 490 80 1.0 1.0 70 75 686 1,372 5,755 1.38×10-5 0.678×10-3 4.6
264.6 15 6,000 662 1,323 60 1.0 1.0 70 80 980 1,960 6,520 0.550×10-4 0.563×10-3 8.5
490 15 6,000 1,225 Bolt fastening 2,450 50 1.0 1.0 60 75 1,764 3,528 9,428 1.82×10-4 0.363×10-2 14.6
Through-hole bolt fastening 1,960
980 15 6,000 2,450 Bolt fastening 4,900 40 1.0 1.0 50 80 2,450 4,900 11,802 0.475×10-3 0.953×10-2 19.5
Through-hole bolt fastening 3,430
1,960 15 6,000 4,900 Bolt fastening 9,800 30 1.0 1.0 50 80 8,820 17,640 31,455 1.39×10-3 1.94×10-2 55.6
Through-hole bolt fastening 7,350
3,136 15 6,000 7,840 15,680 25 1.0 1.0 50 85 20,580 39,200 57,087 0.518×10-2 0.405×10-1 79.5
4,900 15 6,000 12,250 24,500 20 1.0 1.0 50 80 34,300 78,400 82,970 0.996×10-2 1.014×10-1 154
 
4. The allowable torque will vary according to the thrust load. Please confirm by the allowable moment line diagram.
5. For moment stiffness and torsion stiffness, please refer to the inclination angle and torsion angle calculation.
6. Rated torque refers to the torque value reflecting the rated life at rated output speed, not the data showing the upper limit of load. Please refer to the glossary (p.81) and product selection flow chart (p.82).
7. The above specifications are obtained according to the company’s evaluation method. Please confirm that the product meets the use conditions of carrying real aircraft before use.
8. When the radial load is within dimension B, please use it within the allowable radial load range.
US $620-1,300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 600/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Rating table
Output speed (rpm) 5 10 15 20 25 30 40 50 60
Model Speed ratio code R
Speed ratio
Output torque (nm)
Input capacity (kw)
Axis rotation Shell rotation
RV-10C 27 27 26 136
/ 0.09
111
/ 0.16
98
/ 0.21
90
/ 0.25
84
/ 0.29
80
/ 0.34
73
/ 0.41
68
/ 0.47
65
/ 0.54
RV-27C 36.57 1,390/38 1352/38 368
/ 0.26
299
/ 0.42
265
/ 0.55
243
/ 0.68
227
/ 0.79
215
/ 0.90
197
/ 1.10
184
/ 1.29
174
/ 1.46
RV-50C 32.54 1,985/61 1924/61 681
/ 0.48
554
/ 0.77
490
/ 1.03
450
/ 1.26
420
/ 1.47
398
/ 1.67
366
/ 2.04
341
/ 2.38
 
RV-100C 36.75 36.75 35.75 1,362
/ 0.95
1,107
/ 1.55
980
/ 2.05
899
/ 2.51
841
/ 2.94
796
/ 3.33
730
/ 4.08
   
RV-200C 34.86 1,499/43 1456/43 2,724
/ 1.90
2,215
/ 3.09
1,960
/ 4.11
1,803
/ 5.04
1,686
/ 5.88
1,597
/ 6.69
     
RV-320C 35.61 2,778/78 2700/78 4,361
/ 3.04
3,538
/ 4.94
3,136
/ 6.57
2,881
/ 8.05
2,690
/ 9.41
       
RV-500C 37.34 3,099/83 3016/83 6,811
/ 4.75
5,537
/ 7.73
4,900
/ 10.26
4,498
/ 12.56
         
Note: 1. The allowable output speed is affected by duty cycle, load, and ambient temperature. When the allowable output speed is above NS1, please consult our company about the precautions.
2. Calculate the input capacity (kW) by the following formula.
Input capacity (kW)=2π*N*T/60*η/100*10*10*10 N: output speed (RPM)
T: output torque (nm)
η =  75: reducer efficiency (%)
The input capacity is the reference value.
3. When using the reducer at a low temperature, the no-load running torque will increase, so please pay attention when selecting the motor.
(refer to low-temperature characteristics)

###

T0
Rated torque
(note. 7)
N0
Rated output speed
K
Rated life
TS1
Allowable starting and stopping torque
TS2
Instantaneous maximum allowable torque
NS0
Allowable maximum output speed
(Note 1)
Backlash Empty range MAX. Angle transfer Error MAX. Start efficiency represents the value MO1
MO1. Permissible moment (Note.4)
MO2
Momstant moment Permissible moment
Wr
Allowable radial load (Note.9)
I
Converted value of inertia moment input shaft
(note. 5)
Moment of inertia I
(I = GD2 / 4) standard center gear
weight
(Nm) (rpm) (h) (Nm) (Nm) (r/min) (arc.sec.) (arc.min.) (arc.sec.) (%) (Nm) (Nm) (N) (kgm2) (kgm2) (kg)
98 15 6,000 245 490 80 1.0 1.0 70 75 686 1,372 5,755 1.38×10-5 0.678×10-3 4.6
264.6 15 6,000 662 1,323 60 1.0 1.0 70 80 980 1,960 6,520 0.550×10-4 0.563×10-3 8.5
490 15 6,000 1,225 Bolt fastening 2,450 50 1.0 1.0 60 75 1,764 3,528 9,428 1.82×10-4 0.363×10-2 14.6
Through-hole bolt fastening 1,960
980 15 6,000 2,450 Bolt fastening 4,900 40 1.0 1.0 50 80 2,450 4,900 11,802 0.475×10-3 0.953×10-2 19.5
Through-hole bolt fastening 3,430
1,960 15 6,000 4,900 Bolt fastening 9,800 30 1.0 1.0 50 80 8,820 17,640 31,455 1.39×10-3 1.94×10-2 55.6
Through-hole bolt fastening 7,350
3,136 15 6,000 7,840 15,680 25 1.0 1.0 50 85 20,580 39,200 57,087 0.518×10-2 0.405×10-1 79.5
4,900 15 6,000 12,250 24,500 20 1.0 1.0 50 80 34,300 78,400 82,970 0.996×10-2 1.014×10-1 154
 
4. The allowable torque will vary according to the thrust load. Please confirm by the allowable moment line diagram.
5. For moment stiffness and torsion stiffness, please refer to the inclination angle and torsion angle calculation.
6. Rated torque refers to the torque value reflecting the rated life at rated output speed, not the data showing the upper limit of load. Please refer to the glossary (p.81) and product selection flow chart (p.82).
7. The above specifications are obtained according to the company’s evaluation method. Please confirm that the product meets the use conditions of carrying real aircraft before use.
8. When the radial load is within dimension B, please use it within the allowable radial load range.

Condition Monitoring of Cyclone Gearboxes

Whether you’re considering using a cycloidal gearbox in your home, office, or garage, you’ll want to make sure it’s made of quality material. You also want to make sure it’s designed properly, so it won’t be damaged by vibrations.helical gearbox

Planetary gearboxes

Compared to cycloidal gearboxes, planetary gearboxes are lighter and more compact, but they lack the precision and durability of the former. They are better suited for applications with high torque or speed requirements. For this reason, they are usually used in robotics applications. But, cycloidal gearboxes are still better for some applications, including those involving shock loads.
There are many factors that affect the performance of gearboxes during production. One of these is the number of teeth. In the case of planetary gearboxes, the number of teeth increases with the number of planets. The number of teeth is reduced in cycloidal gearboxes, which results in higher transmission ratios. These gearboxes also have lower breakaway torques, which means that they can be controlled more easily by the user.
A cycloid gearbox is comprised of three main parts: the ring gear, the sun gear, and the input shaft. The ring gear is fixed in the gearbox, while the sun gear transmits the rotation to the planet gears. The input shaft transfers motion to the sun gear, which in turn transmits it to the output shaft. The output shaft has a larger torque than the input shaft.
Cycloid gears have better torsional stiffness, lower wear, and lower Hertzian contact stress. However, they are also larger in size and require highly accurate manufacturing. Cycloid gears can be more difficult to manufacture than involute gears, which require large amounts of precision.
Cycloid gears can offer transmission ratios up to 300:1, and they can do this in a small package. They also have lower wear and friction, which makes them ideal for applications that require a high transmission ratio.
Cycloid gearboxes are usually equipped with a backlash of about one angular minute. This backlash provides the precision and control necessary for accurate movement. They also provide low wear and shock load capacity.
Planetary gearboxes are available in single and two-stage designs, which increase in length as stages are added. In addition to the two stages, they can be equipped with an optional output bearing, which takes up mounting space. In some applications, a third stage is also available.

Involute gears

Generally, involute gears are more complex to manufacture than cycloidal gears. For example, an involute gear tooth profile has a single curve while a cycloidal gear tooth profile has two curves. In addition, the involute curve is not within the base circle.
The involute curve is a very important component of a gear tooth and it can significantly influence the quality of contact meshing between teeth. Various works have been done on the subject, mainly focusing on the operating principles. In addition, the most important characteristic of the double-enveloping cycloid drive is its double contact lines between the meshing tooth pairs.
Cycloid gears are more powerful, less noisy, and last longer than involute gears. They also require less manufacturing operations during production. However, cycloid gears are more expensive than involute gears. Involute gears are more commonly used in linear motions while cycloid gears are used for rotary motions.
Although cycloid gears are more technically advanced, involute gears have the superior quality and are more aesthetically pleasing. Cycloid gears are used in various industrial applications such as pumps and compressors. They are also widely used in the watch industry. Nevertheless, involute gears have not yet replaced cycloid gears in the watch industry.
The cycloid disc has a number of pins around its outer edge, while an involute gear has only a single curve for the teeth. In addition, cycloid gears have a more robust and reliable design. Involute gears, on the other hand, have a cheaper rack cutter and less expensive involute teeth.
The cycloid disc’s transmission accuracy is about 98.5%, while the ring gear’s transmission accuracy is about 96%. The cycloid disc’s rotational velocity has a magnitude of 3 rad/s. A small change in the center distance does not affect the transmission accuracy. However, rotational velocity fluctuation can affect the transmission accuracy.
Cycloid gears also have the cycloid gear disc’s rotational velocity. The disc has N lobes. However, the cycloid gear disc’s transmission accuracy is still not perfect. This is because of the large rotational angles between the lobes. This also makes it difficult to manufacture.helical gearbox

Vibrations

Using modern techniques for vibration diagnostics and data-driven methods, this article presents a new approach to condition monitoring of cycloidal gearboxes. This approach focuses on detecting the root cause of gearbox failure. The article aims to provide a unified approach to gear designers.
A cycloidal gearbox is a high-precision gearbox that is used in heavy-duty machines. It has a large reduction ratio, which makes it necessary to have a very large input speed. Cycloid gears have high accuracy, but they are susceptible to vibration issues. In this article, the authors describe how a cycloidal gearbox works and how vibrations are measured. They also show how this gearbox can be used to detect faults.
The gearbox is used in positioners, multi-axis robots, and heavy-duty machines. The main characteristics of this gearbox are the high accuracy, the overload capacity, and the large reduction ratio.
There is little documentation on vibrations and condition monitoring of cycloidal gearboxes. The authors describe their approach to the problem, using a cycloidal gearbox and a testing bench. Their approach involves measuring the frequency of the gearbox with different input speeds.
The results show a good separation between the healthy and damaged states. Fault frequencies show up in the lower orders of frequencies. Faults can be detected using binning, which eliminates the need for a tachometer. In addition, binning is combined with Principal Component Analysis to determine the state of the gearbox.
This method is compared to traditional techniques. In addition, the results show how binning can be used to calculate the defect frequencies of the bearings. It is also used to determine the frequencies of the components.
The signals from the test bench are acquired using four sensors. These sensors are medium sensitivity 100 mV/g accelerometers. The signals are then processed using different signal processing techniques. The results show that the vibration signals are correlated with the internal motion of the gearbox. This information is used to identify the internal frequency of the transmission.
The frequency analysis of vibration signals is performed in cyclostationary and noncyclostationary conditions. The signals are then analyzed to determine the magnitude of the gear meshing frequency.helical gearbox

Design

Using precision gearboxes, servomotors can now control heavy loads at high speed. Unlike cam indexing devices, cycloidal gears provide extremely accurate positioning and high torque. They also provide excellent torsional stiffness and shock load capacity.
Cycloid gears are specially designed to minimize vibration at high RPM. Unlike involute gears, they are not stacked, which reduces friction and forces experienced by each tooth. In addition, cycloidal gears have lower Hertzian contact stress.
Cycloid gears are often used in multi-axis robots for positioners. They can provide transmission ratios as high as 300:1 in a compact package. They are also used in first joints in heavy machines. However, they require extremely accurate manufacturing. They are also more difficult to produce than involute gears.
A cycloidal gearbox is a type of planetary gearbox. Cycloid gears are specially designed for high gear ratios. They also have the ability to provide a large reduction ratio in a single stage. They are increasingly used in first joints in heavy machines. They are also becoming more common in robotics.
In order to achieve a large reduction ratio, the input speed of the gear must be very high. Generally, the input speed is between 500 rpm and 4500 rpm. However, in some cases, the input speed may be lower.
A cycloid is formed by rolling a rolling circle on a base circle. The ratio between the rolling circle diameter and the base circle diameter determines the shape of the cycloid. A hypocycloid is formed by rolling primarily on the inside of the base circle, while an epicycloid is formed by rolling primarily on the outside of the base circle.
Cycloid gears have a very small backlash, which minimizes the forces experienced by each tooth. These gears also have a good torsional stiffness, low friction, and shock load capacity. They also provide the best positioning accuracy.
The cycloidal gearbox was designed and built at Radom University. The design was based on three different cycloidal gears. The first pair had the external profile at the nominal dimension, while the second pair had the profile minus tolerance. The load plate had threaded screw holes arranged 15 mm away from the center.
China High Torque Hollow Shaft Reducer Compact RV Cycloidal Pin Wheel Gearbox for Robot Joints Nabtesco RV Gearbox     with high quality China High Torque Hollow Shaft Reducer Compact RV Cycloidal Pin Wheel Gearbox for Robot Joints Nabtesco RV Gearbox     with high quality
editor by czh 2023-01-15

China Maximum Allowable Output Speed 80r/m 10C BX RVC Series High Precision Cycloidal Hollow Type Mounted Gearbox For CNC Turret cycloidal drive mechanism

Product Description

Optimum Allowable Output Velocity 80r/m 10C BX RVC Series High Precision Cycloidal Hollow Variety Mounted Gearbox For CNC Turret

Model:10CBX-RVC

Much more Code And Specification:

E series C series
Code Outline dimension  General model Code Define dimension The original code
120 Φ122 6E 10C Φ145 150
150 Φ145 20E 27C Φ181 a hundred and eighty
a hundred ninety Φ190 40E 50C Φ222 220
220 Φ222 80E 100C Φ250 250
250 Φ244 110E 200C Φ345 350
280 Φ280 160E 320C Φ440 440
320 Φ325 320E 500C Φ520 520
370 Φ370 450E      

Equipment ratio And Specification

E Sequence C Sequence
Code Reduction Ratio New code  Monomer reduction ratio
120 forty three,53.5,fifty nine,79,103 10CBX 27.00
a hundred and fifty eighty one,105,121,141,161 27CBX 36.fifty seven
190 81,one hundred and five,121,153 50CBX 32.54
220 eighty one,101,121,153 100CBX 36.seventy five
250 eighty one,111,161,175.28 200CBX 34.86
280 81,a hundred and one,129,one hundred forty five,171 320CBX 35.61
320 81,one zero one,118.5,129,141,171,185 500CBX 37.34
370 81,101,118.5,129,154.8,171,192.four    
Note 1: E series,these kinds of as by the shell(pin shell)output,the corresponding reduction ratio by 1
Note 2: C collection equipment ratio refers to the motor installed in the casing of the reduction ratio,if installed on the output flange side,the corresponding reduction ratio by one

Reducer variety code
REV: principal bearing developed-in E type
RVC: hollow kind
REA: with enter flange E kind
RCA: with input flange hollow type

Software:

Firm Info

FAQ
Q: What’re your main merchandise?
A: We at present make Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Equipment Box and so on. You can examine the specifications for earlier mentioned motors on our internet site and you can electronic mail us to advise necessary motors for each your specification as well.

Q: How to pick a ideal motor?
A:If you have motor images or drawings to display us, or you have in depth specs like voltage, speed, torque, motor size, working mode of the motor, necessary lifetime and sound amount and so forth, you should do not hesitate to permit us know, then we can advise suited motor for each your ask for accordingly.

Q: Do you have a tailored service for your normal motors?
A: Yes, we can customise per your request for the voltage, speed, torque and shaft dimensions/form. If you want further wires/cables soldered on the terminal or require to insert connectors, or capacitors or EMC we can make it as well.

Q: Do you have an person style service for motors?
A: Yes, we would like to design and style motors independently for our buyers, but it may want some mould creating expense and layout demand. 

Q: What’s your direct time?
A: Generally speaking, our standard normal solution will want 15-30days, a bit longer for tailored products. But we are quite adaptable on the guide time, it will depend on the particular orders.

Please make contact with us if you have comprehensive requests, thank you !

 

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Machinery, Robotic
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

E series C series
Code Outline dimension  General model Code Outline dimension The original code
120 Φ122 6E 10C Φ145 150
150 Φ145 20E 27C Φ181 180
190 Φ190 40E 50C Φ222 220
220 Φ222 80E 100C Φ250 250
250 Φ244 110E 200C Φ345 350
280 Φ280 160E 320C Φ440 440
320 Φ325 320E 500C Φ520 520
370 Φ370 450E      

###

E Series C Series
Code Reduction Ratio New code  Monomer reduction ratio
120 43,53.5,59,79,103 10CBX 27.00
150 81,105,121,141,161 27CBX 36.57
190 81,105,121,153 50CBX 32.54
220 81,101,121,153 100CBX 36.75
250 81,111,161,175.28 200CBX 34.86
280 81,101,129,145,171 320CBX 35.61
320 81,101,118.5,129,141,171,185 500CBX 37.34
370 81,101,118.5,129,154.8,171,192.4    
Note 1: E series,such as by the shell(pin shell)output,the corresponding reduction ratio by 1
Note 2: C series gear ratio refers to the motor installed in the casing of the reduction ratio,if installed on the output flange side,the corresponding reduction ratio by 1
To Be Negotiated 1 Piece
(Min. Order)

###

Application: Machinery, Robotic
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

E series C series
Code Outline dimension  General model Code Outline dimension The original code
120 Φ122 6E 10C Φ145 150
150 Φ145 20E 27C Φ181 180
190 Φ190 40E 50C Φ222 220
220 Φ222 80E 100C Φ250 250
250 Φ244 110E 200C Φ345 350
280 Φ280 160E 320C Φ440 440
320 Φ325 320E 500C Φ520 520
370 Φ370 450E      

###

E Series C Series
Code Reduction Ratio New code  Monomer reduction ratio
120 43,53.5,59,79,103 10CBX 27.00
150 81,105,121,141,161 27CBX 36.57
190 81,105,121,153 50CBX 32.54
220 81,101,121,153 100CBX 36.75
250 81,111,161,175.28 200CBX 34.86
280 81,101,129,145,171 320CBX 35.61
320 81,101,118.5,129,141,171,185 500CBX 37.34
370 81,101,118.5,129,154.8,171,192.4    
Note 1: E series,such as by the shell(pin shell)output,the corresponding reduction ratio by 1
Note 2: C series gear ratio refers to the motor installed in the casing of the reduction ratio,if installed on the output flange side,the corresponding reduction ratio by 1

The Basics of a Cyclone Gearbox

Besides being compact, cycloidal speed reducers also offer low backlash and high ratios. Because of the small size of the drive, they are ideal for applications where space is a problem.helical gearbox

Involute gear tooth profile

Almost all gears use an involute gear tooth profile. This profile has a single curve, which means that the gear teeth do not have to be aligned closely with each other. This profile is smooth and can be manufactured easily.
Cycloid gears have a combination of epicycloid and hypocycloid curves. This makes them stronger than involute gear teeth. However, they can be more expensive to manufacture. They also have larger reduction ratios. They transmit more power than involute gears. Cycloid gears can be found in clocks.
When designing a gear, you need to consider several factors. Some of these include the number of teeth, the tooth angle and the lubrication type. Having a gear tooth that is not perfectly aligned can result in transmission error, noise and vibration.
The tooth profile of an involute gear is usually considered the best. Because of this, it is used in a wide variety of gears. Some of the most common applications for this profile are power transmission gears. However, this profile is not the best for every application.
Cycloid gears require more complex manufacturing processes than involute gear teeth. This can cause a larger tooth cost. Cycloid gears are used for less noisy applications.
Cycloid gears also transmit more power than involute gears. This can cause problems if the radii change tangentially. However, the shape is more simple than involute gears. Involute gears can handle centre sifts better.
Cycloid gears are less susceptible to transmission error. Cycloid gears have a convex surface, which makes them stronger than involute teeth. Cycloid gears also have a larger reduction ratio than involute gears. Cycloid teeth do not interfere with the mating teeth. However, they have a smaller number of teeth than involute teeth.

Rotation on the inside of the reference pitch circle of the pins

Whether a cycloidal gearbox is designed for stationary or rotating applications, the fundamental law of gearing must be observed: The ratio of angular velocities must be constant. This requires the rotation on the inside of the reference pitch circle of the pins to be constant. This is achieved through a series of cycloidal teeth, which act like tiny levers to transmit motion.
A cycloidal disc has N lobes which are rotated by three lobes per rotation around N pins. The number of lobes on a cycloidal disc is a significant factor in determining the transmission ratio.
A cycloidal disc is driven by an eccentric input shaft which is mounted to an eccentric bearing within an output shaft. As the input shaft rotates, the cycloidal disc moves around the pins of the pin disc.
The drive pin rotates at a 40 deg angle while the cycloidal disc rotates on the inside of the reference pitch circle of pins. As the drive pin rotates, it will slow the output motion. This means that the output shaft will complete only three revolutions with the input shaft, as opposed to nine revolutions with the input shaft.
The number of teeth on a cycloidal disc must be small compared to the number of surrounding pins. The disc must also be constructed with an eccentric radius. This will determine the size of the hole which will be required for the pin to fit between the pins.
When the input shaft is turned, the cycloidal disc will rotate on the inside of the reference pitch circle of roller pins. This will then transmit motion to the output shaft. The output shaft is supported by two bearings in an output housing. This design has low wear and torsional stiffness.helical gearbox

Transmission ratio

Choosing the right transmission ratio of cycloidal gearbox isn’t always easy. You might need to know the size of your gearbox before you can make an educated choice. You may also need to refer to the product catalog for guidance. For example, CZPT gearboxes have some unique ratios.
A cycloidal gear reducer is a compact and high-speed torque transmission device that reverses the direction of angular movement of the follower shaft. It consists of an eccentric cam positioned inside a cycloidal disc. Pin rollers on the follower shaft fit into matching holes in the cycloidal disc. In the process, the pins slide around the holes, in response to wobbling motion. The cycloidal disc is also capable of engaging the internal teeth of a ring-gear housing.
A cycloidal gear reducer can be used in a wide variety of applications, including industrial automation, robotics and power transmissions on boats and cranes. A cycloidal gear reducer is ideally suited for heavy duty applications with large payloads. They require specialized manufacturing processes, and are often used in equipment with precise output and high efficiency.
The cycloidal gear reducer is a relatively simple structure, but it does require some special tools. Cycloid gear reducers are also used to transmit torque, which is one of the reasons they are so popular in automation. Using a cycloidal gear reducer is a good choice for applications that require higher efficiency and lower backlash. It is also a good choice for applications where size is a concern. Cycloid gears are also a good choice for applications where high speed and high torque are required.
The transmission ratio of cycloidal gearbox is probably the most important function of a gearbox. You need to know the size of your gearbox and the type of gears it contains in order to make the right choice.

Vibration reduction

Considering the unique dynamics of a cycloidal gearbox, vibration reduction measures are required for a smooth operation. These measures can also help with the detection of faults.
A cycloidal gearbox is a gearbox with an eccentric bearing that rotates the center of the gears. It shares torque load with five outer rollers at any given time. It can be applied in many applications. It is a relatively inexpensive asset. However, if it fails, it can have significant economic impacts.
A typical input/output gearbox consists of a ring plate and two cranks mounted on the input shaft. The ring plate rotates when the input shaft rotates. There are two bearings on the output shaft.
The ring plate is a major noise source because it is not balanced. The cycloidal gear also produces noise when it meshes with the ring plate. This noise is generated by structural resonance. Several studies have been performed to solve this problem.
However, there is not much documented work on the condition monitoring of cycloidal gearboxes. In this article, we will introduce modern techniques for vibration diagnostics.
A cycloidal gearbox with a reduced reduction ratio has higher induced stresses in the cycloidal disc. In this case, the size of the output hole is larger and more material is removed from the cycloidal disc. This increase in the disc’s stresses leads to higher vibration amplitudes.
The load distribution along the width of the gear is an important design criterion. Using different gear profiles can help to optimize the transmission of torque. The contact stress of the cycloidal disc can also be investigated.
To determine the amplitude of the noise, the frequency of the gear mesh is multiplied by the shaft rate. If the RPM is relatively stable, the frequency can be used as a measure of magnitude. However, this is only accurate at close to failure.helical gearbox

Comparison with planetary gearboxes

Several differences exist between cycloidal gearboxes and planetary gearboxes. They are related to gear geometry and manufacturing processes. Among them, there are:
– The output shaft of a cycloidal gearbox has a larger torque than the input shaft. The rotational speed of the output shaft is lower than the input shaft.
– The cycloid gear disc rotates at variable velocity, while the planetary gear has a fixed speed. Consequently, the cycloid disc and output flange transmission accuracy is lower than that of the planetary gears.
– The cycloidal gearbox has a larger gripping area than the planetary gear. This is an advantage of the cycloidal gearbox in that it can handle larger loads.
– The cycloid profile has a significant impact on the quality of contact meshing between the tooth surfaces. The width of the contact ellipses increases by 90%. This is a result of the elimination of undercuts of the lobes. In this way, the contact force on the cycloid disc is decreased significantly.
– The cycloid drive has lower backlash and high torsional stiffness. This allows a cycloidal drive to be more stable against shock loads. The cycloid drive is also a compact design, which is ideally suited for applications with large transmission ratios.
– The output hub of the cycloid gearbox has movable pins and rollers. These components are attached to the ring gear in the outer gearbox. The output shaft is also turned by the planet carrier. The output hub of the cycloid system is composed of two parts: the ring gear and the output flange.
– The input shaft of a cycloidal gearbox is connected to a servomotor. The input shaft is a cylindrical element that is fixed to the planet carrier.
China Maximum Allowable Output Speed 80r/m 10C BX RVC Series High Precision Cycloidal Hollow Type Mounted Gearbox For CNC Turret     cycloidal drive mechanismChina Maximum Allowable Output Speed 80r/m 10C BX RVC Series High Precision Cycloidal Hollow Type Mounted Gearbox For CNC Turret     cycloidal drive mechanism
editor by czh 2022-12-17

in Hannover Germany sales price shop near me near me shop factory supplier Ka Hollow Shaft Gearbox with Motor for Cement Industry manufacturer best Cost Custom Cheap wholesaler

  in Hannover Germany  sales   price   shop   near me   near me shop   factory   supplier Ka Hollow Shaft Gearbox with Motor for Cement Industry manufacturer   best   Cost   Custom   Cheap   wholesaler

In 2008, it was awarded with “Nationwide Export Commodity Inspection-cost-free Organization”. Meanwhile, our goods are manufactured according to large good quality standards, and complying with the international innovative regular requirements. Fantastic focus has been paid on environmental safety and vitality saving.

gt Item Introduction

ninety Degree EPTTl Helical EPTT EPTT

K helical pace EPTT motor is created based mostly on modularization, which provide a lot of difference types of combos, mounting varieties, and framework types. The element classification of ratio can satisfy numerous of operating problem. Large EPTT efficiency, lower power usage, superior overall performance. The tough tooth floor EPTT use the substantial high quality alloy steel, the method of carburizing and quenching, grinding ,which give it following characters: Secure EPTT, lower noise and temperature, higher loading, EPTT doing work daily life.

gt EPTT EPTT EPTTs

housing material: EPTT2OO high-toughness forged iron or EPTT250 Higher strength solid iron
Equipment material: 20CrMnTi
EPTT hardness HBS90-240
Surface hardness of EPTT EPTC58 deg-sixty two deg
Gear core hardness EPTC33 deg-forty deg
Input/Output shaft content 40Cr
Enter/Output shaft hardness HBS241 deg-286 deg
Shaft at oil seal situation hardness EPTC48 deg -fifty five deg
Machining precision of EPTTs substance Precise grinding 6-five grade
Efficiency up to ninety eight%
Noise(Max) sixty-68dB
Temp.increase: 40 degC
Vibration le20um
EPTT IP54, F class ,B5 FLANGE
coloration : blue (if you need to have massive quantity ,we can carried out as your wished coloration )

gtEPTT CATALOGUE :

gt Creating Approach

gt WORKSHOP Tools:

CERTIFICATION :

gt EPTTAGE :
for a single container, immediately loading ,for considerably less, all products with pallet,


FAQ
one, Q:what’s your MOQ for ac EPTT motor ?
A: 1pc is alright for every sort electric EPTT box motor

2, Q: What about your guarantee for your induction speed EPTT motor ?
A: 1 calendar year ,but except guy-made ruined

3, Q: which payment way you can settle for ?
A: TT, western union .

four, Q: how about your payment way ?
A: one hundred%payment EPTTd significantly less $5000 ,thirty% payment EPTTd payment , 70% payment ahead of sending more than $5000.

five, Q: how about your EPTT of pace reduction motor ?
A: plywood situation ,if size is modest ,we will pack with pallet for less one particular container

6, Q: What data must be offered, if I buy electrical helical EPTTed motor from you ?
A: rated EPTT, ratio or output speed,type ,voltage , mounting way , amount , if more is far better.

  in Hannover Germany  sales   price   shop   near me   near me shop   factory   supplier Ka Hollow Shaft Gearbox with Motor for Cement Industry manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Hannover Germany  sales   price   shop   near me   near me shop   factory   supplier Ka Hollow Shaft Gearbox with Motor for Cement Industry manufacturer   best   Cost   Custom   Cheap   wholesaler

in Kuwait City Kuwait sales price shop near me near me shop factory supplier Fa37-157 Helical Gearbox High Quality with Hollow Output manufacturer best Cost Custom Cheap wholesaler

  in Kuwait City Kuwait  sales   price   shop   near me   near me shop   factory   supplier Fa37-157 Helical Gearbox High Quality with Hollow Output manufacturer   best   Cost   Custom   Cheap   wholesaler

EPG will often adhere to it enterprise spirit of being practical, innovative, effective and outstanding to make the leading international transmission push. we provide chromed bar and tubes for hydualic and pheumatic cylinders. Retaining in brain that excellent services is the essential to cooperating with clients, we try to meet large good quality requirements, supply competitive charges and ensure prompt shipping.

Type: F sequence PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel Shaft Helical Gear EPTT
Model: FAF37-FAF157
Brand name name: EPTT
Shade: Blue/Grey or on request
EPTT: EPTT250
Enter EPTT: .12-200kw
Output torque: 1.four-22500N.m
Output pace: .06-374rpm
EPTT: C ampU EPTT,NSK,SKF or on request
Seal: SKF,CTY,CFW or on ask for
Origin: EPTT, EPTT
Warranty: one yr

Characteristics of merchandise

one. Extremely StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Modular Designed: The merchandise are effortlessly connected with and EPTTn by distinct kinds of motors and a variety of enter EPTT. The same type EPTTed motor can be adapted to optioned EPTTs of motors. It is therefore simple to understand different resolution for assorted specifications.

two. Ratio: Showcased a lot of closely divided ratios and broad assortment of them. Extremely huge last ratios can be attained by means of combined unites to reach incredibly lower output speeds.

3. Mounting Arrangement: No stringent limitation to the mounting arrangement.

four. Substantial Power, Compact Dimension: EPTTs are manufactured of substantial strength cast iron. Gears and shaft EPTTs are finished with gas carburizing method and specific grounding to sequentially get substantial loading capacity of per particular quantity.

5. EPTT Services Daily life: UnEPTTthe situation of precisely deciding on type measurement and the typical routine maintenance and use, main components (count on those effortlessly-disabled parts) can last as EPTT as up to a lot more than twenty five,000 several hours. Simply-disabled areas incEPTT lubricating oil, oil seals, and bearings.

six. Minimal Sound: All important factors are completed by exactly machining, accurate assembly, and lastly analyzed, and as a result, pretty lower sounds is achieved.

seven. Large Performance: The performance of EPTT device can get to ninety five%, The effectiveness of worm EPTT device can achieve 89%.

eight. Big radial loading capability.

nine. AXiHu (West Lake) Dis.al load capability of up to 5% of radial load.


(1) With superb good quality and Reasonable value

(two) Assure to shipping on time

(three) Safe, reputable, inexpensive and resilient

(four) Stable EPTT, tranquil procedure

(five) High warmth-radiating efficiency, higher carrying potential

(six) Each and every product should be examined ahead of sending

  in Kuwait City Kuwait  sales   price   shop   near me   near me shop   factory   supplier Fa37-157 Helical Gearbox High Quality with Hollow Output manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Kuwait City Kuwait  sales   price   shop   near me   near me shop   factory   supplier Fa37-157 Helical Gearbox High Quality with Hollow Output manufacturer   best   Cost   Custom   Cheap   wholesaler

in Tiruppur India sales price shop near me near me shop factory supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Tiruppur India  sales   price   shop   near me   near me shop   factory   supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Our goods are made by modern day computerized equipment and tools. With many years’ expertise in these lines, we have been distinguished from other suppliers in China by our benefits in aggressive pricing, on-time shipping, prompt responses, on-hand engineering assist and excellent soon after-sales services. With numerous years’ experience in this line, we will be reliable by our rewards in aggressive price, one-time shipping, prompt reaction, on-hand engineering assistance and very good right after-sales providers.Additionally, all our generation methods are in compliance with ISO9001 requirements. Hollow Shaft Flange Mounted Helical EPTT

S Series Higher Efficiency Equipment EPTT with EPTT or with no EPTT

EPTT materials EPTT200 large-energy solid iron from K37,forty seven,fifty seven,sixty seven,seventy seven,87
EPTT substance EPTT250 Large toughness solid iron from K97,127,157,167,187
EPTT hardness HBS90-240
Equipment material 20CrMnTi
Surface hardnesss of EPTT EPTC58 deg-62 deg
Gear core hardness EPTC33 deg-40 deg
Input/Output shaft substance 40CrMnTi
Enter/Output shaft hardness HBS241 deg-286 deg
Shaft at oil seal postion hardness EPTC48 deg -fifty five deg
Machining precision of EPTTs content Correct grinding six-5 grade
Heat treatment method tempering, cementing, quenching etc
Performance up to ninety%
Sounds(Max) 60-68dB
Device design Foot mounted,flange mounted,hollow shaft mounted
Input strategy flange enter,inline input,shaft enter
Vibration le 20um
Backlash le 20Arcmin
EPTT manufacturers NSK,C ampU and many others
Oil seal makes NAK,SKF and so forth
Lubricant VG220
EPTT IP55, F course
EPTT shaft 40Cr, Tempering, cementing,quenching etc.

1.Our Companies

one.one.We give twelve months Warranty.
1.two. We have hundreds of EPTT EPTTs. From Input EPTT .06KW to 200KW, Ratio one.three-289.seventy four, Output speed -1095rpm and Output torque one.four-62800Nm. They can satisfy your all different needs for various EPTT.
one.3. We provide E-catalog or Paper catalog,so you can pick the model effortlessly according to your needs
one.four.You are welcome to visit our manufacturing unit to check out our items,we can assist you to ebook the lodge or ticket

two.Company Data

2.one.Our Business:
The Predecessor for ZheJiang EPTT Generate CO.,Ltd (initially called HangEPTT XiHu (West Lake) Dis.ngguang EPTT EPTTry CO.,Ltd) Condition-owned armed forces mould EPTTrpriese which estabEPTTd in 1965.

EPTT is situated in HangEPTT,EPTT and the manufacturing facility covers an region of about 25000 square meters.

Production Capacity:far more than half a million sets of pace EPTT per 12 months.

2.2.Our Men and women:
The business has a strong specialized force. It has a lot more than four hundred workers at existing, incXiHu (West Lake) Dis.Hu (West Lake) Dis. far more than forty engineering experts and ten authorities and senior engineers enEPTTing EPTT allowances of the Condition Council.

two.three. Our Certificates:
Handed quot ISO 9001 Worldwide EPTT Method Certification quot, quotInternational EPTT Credit rating AAA Ceritifacte quot , quot Swiss SGS Certification quot, Legendary Manufacturer in EPTT EPTT Sector quot, quotFamous Model of ZheJiang Province quot, quotNon-general public Scientific and Technological EPTTrprise in ZheJiang Province quot, quotNational High and EPTT-tech EPTTrprise quot, quotTOP 50 in EPTT Equipment Industry quot quot2011 HangEPTT Engineering and Technological R ampD CEPTTr quot and so on.

three. FAQ

Q:Are you a buying and selling firm or company?
A: HangEPTT EPTT Drive Co., Ltd earlier was a State-owned XiHu (West Lake) Dis.ngguang Mold Manufacturing facility, a state-owned army EPTT EPTTrprise estabEPTTd in 1965. It finished reform in 2002. Considering that reform, EPTT has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed quickly. It took the lead in passing ISO9001 Global EPTT System Certificate and Global EPTT Credit history AAA Certification in 2004, and Swiss SGS Certification in 2009. It has gained this sort of titles as quotIconic Model in EPTT EPTT Sector quot, quotFamous Brand of ZheJiang Province quot, quotNon-community Scientific and Technological EPTTrprise in ZheJiang Province quot, quotNational High and EPTT-tech EPTTrprise quot, and quotTope 50 in EPTT Equipment Market quot successively

Q:In which do you base?
A: We are in HangEPTT,ZheJiang ,EPTT. We have two factories,EPTT manufacturing unit is in XiHu (West Lake) Dis.hu (West Lake) Dis. district,HangEPTT,EPTT and the old one is in CHangEPTT District,HangEPTT,EPTT.

Q:What sorts of EPTT can you make for us?
A:Main items of our organization: JWB-X sequence mechanical continuously variable EPTT, RV series worm EPTT EPTT, B/JXJ cycloidal pin EPTT pace EPTT, NCJ collection EPTT EPTT, and R, F K, S sequence helical-tooth EPTT (SEW), more than 1 hundred types and hundreds of specs.

Q:What are the application of the EPTT?
A:EPTT are broadly used in ceramic, EPTT, foods, metallurgy, beer amp consume, printing and dyeing, textile, petrochemical engineering, warehouse EPTT, wooden-operating EPTT, environmental safety gear, printing and EPTT, pharmacy, and leather-based. EPTT are sold in some countries and locations, such as Europe, The usa, and SouthEPTT Asia, and it possesses dozens of distributors and right after-sale provider agents.

Q:What is the content you use?

A1: EPTT EPTT human body ( For the RV series worm EPTT Dimension 30~ninety)

A2: Solid iron(For the RV sequence worm EPTT, Size 110-a hundred and fifty, For the NCJ amp F/R/S/K series helical EPTT EPTT)

Our factory (ZheJiang EPTT Travel Co., Ltd.) is a big and renowned 6S stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPTT manufacturing facility with about 380 personnel since 1965 . We export to South Asia, SouthEPTT Asia, Africa, Middle EPTT, South The us, North The us, Europe…and many others. We provide EPTT to SIEMENS,ABB,SACMI,BUHLER,MODENA,EPTT…etc. Sincerely hope to establish a earn-earn company relationship with you.

Expecting to speak about a lot more details with you !

Ideal Wishes

  in Tiruppur India  sales   price   shop   near me   near me shop   factory   supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Tiruppur India  sales   price   shop   near me   near me shop   factory   supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

in Malang Indonesia sales price shop near me near me shop factory supplier Right Angle Gearbox 90 Degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Servo Bevel Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Malang Indonesia  sales   price   shop   near me   near me shop   factory   supplier Right Angle Gearbox 90 Degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Servo Bevel Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

EPG is a skilled manufacturer and exporter that is involved with the design, growth and generation. EPG was awarded with “famous product of Zhejiang Province” and “well-known brand name of Zhejiang Province”. The team is focused on generating all assortment of regular roller chains and sprockets, gears & gearboxes, this sort of as conveyor chain & sprockets , stainless metal chain, agricultural chain and has not just marketed its items all over china, but also bought a lot more than 65% products to oversees, which includes Europe, America, South-east Asia, and it also has set up storage logistics in places like Europe.

RigEPTT Angle EPTT ninety Diploma Hollow Shaft Substantial-EPTT Efficiency EPTT Companies Gear Drives Compact EPTT Low Backlash Helical Servo EPTTl EPTT

Large-EPTT RigEPTT Angle Equipment Drives are developed for effectiveness, peaceful operation, and EPTT provider existence. Ever-EPTT delivers a wide choice of RigEPTT Angle Equipment Drives in a variety of configurations, supplies, functioning speeds, and several ratios. StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd catalog things incEPTT precision and business top quality EPTT EPTTs offered in each inch and metric dimensions. For modifications or custom designs get in touch with and sEPTT to a Ever-EPTT programs engineer.

Our providing incEPTTs, but is not minimal to the adhering to:

Miniature sized RigEPTT Angle Gear Drives, 1 inch square, are perfect for compact patterns that need low backlash and input speeds up to 2000 rpm.

When weigEPTT is an problem, get RigEPTT Angle EPTTl Gear Drives that feature a lightweigEPTT housing of PTMT EPTTester 30% EPTT crammed, precision floor stainless metal shafts, sintered bronze bearings and molded EPTT EPTTs.

RigEPTT Angle Worm Gear Drives accommodate enter speeds up to 2000 rpm and are available in EPTT ratios: 5:1, 10:one and twenty:1.

RigEPTT Angle and Dual Helical Gear Drives are offered in two models, light-weight-responsibility, rated speeds up to 600 rpm and weighty responsibility, rated speeds up to 1725 rpm.

  in Malang Indonesia  sales   price   shop   near me   near me shop   factory   supplier Right Angle Gearbox 90 Degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Servo Bevel Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Malang Indonesia  sales   price   shop   near me   near me shop   factory   supplier Right Angle Gearbox 90 Degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Servo Bevel Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

in Ottawa Canada sales price shop near me near me shop factory supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Ottawa Canada  sales   price   shop   near me   near me shop   factory   supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Sophisticated thermo remedy products, these kinds of as network heat treatment method oven, multi-use thermo treatment oven, and so forth. The new products contain a series of substantial-tech and higher quality chains and sprockets and gears, such as chains and gearboxes for agricultural machineries, metallurgical chains, escalator stage-chains, large-velocity tooth chains, timing chains, self-lubrication chains, amid which have kind large velocity tooth chain for automobile branch dynamic box and aerial chains fill in the blanks of chain in China. Hangzhou EPG Co.,Ltd. , was launched in November, 1997. With its five wholly owned subsidiaries. Hollow Shaft Flange Mounted Helical EPTT

S Sequence Higher Performance Equipment EPTT with EPTT or without EPTT

EPTT content EPTT200 higher-power cast iron from K37,forty seven,fifty seven,sixty seven,seventy seven,87
EPTT material EPTT250 High strength solid iron from K97,127,157,167,187
EPTT hardness HBS90-240
Gear materials 20CrMnTi
Surface hardnesss of EPTT EPTC58 deg-sixty two deg
Gear core hardness EPTC33 deg-forty deg
Enter/Output shaft materials 40CrMnTi
Input/Output shaft hardness HBS241 deg-286 deg
Shaft at oil seal postion hardness EPTC48 deg -55 deg
Machining precision of EPTTs content Precise grinding 6-5 grade
Heat therapy tempering, cementing, quenching and so forth
Performance up to ninety%
Sound(Max) sixty-68dB
Device model Foot mounted,flange mounted,hollow shaft mounted
Enter method flange enter,inline enter,shaft enter
Vibration le 20um
Backlash le 20Arcmin
EPTT brand names NSK,C ampU etc
Oil seal makes NAK,SKF etc
Lubricant VG220
EPTT IP55, F course
EPTT shaft 40Cr, Tempering, cementing,quenching and so forth.

one.Our Services

one.one.We give twelve months Guarantee.
one.2. We have hundreds of EPTT EPTTs. From Input EPTT .06KW to 200KW, Ratio one.three-289.74, Output velocity -1095rpm and Output torque one.4-62800Nm. They can meet up with your all various needs for diverse EPTT.
one.3. We provide E-catalog or Paper catalog,so you can select the product effortlessly according to your needs
1.4.You are welcome to visit our manufacturing facility to check out our goods,we can aid you to guide the lodge or ticket

two.Business Details

2.one.Our Company:
The Predecessor for ZheJiang EPTT Drive CO.,Ltd (initially known as HangEPTT XiHu (West Lake) Dis.ngguang EPTT EPTTry CO.,Ltd) Condition-owned armed forces mould EPTTrpriese which estabEPTTd in 1965.

EPTT is situated in HangEPTT,EPTT and the manufacturing facility addresses an location of about 25000 sq. meters.

Manufacturing Capability:far more than 50 % a million sets of speed EPTT for every yr.

2.two.Our People:
The company has a sturdy complex force. It has much more than 400 personnel at current, incXiHu (West Lake) Dis.Hu (West Lake) Dis. more than 40 engineering experts and ten professionals and senior engineers enEPTTing EPTT allowances of the Point out Council.

two.3. Our Certificates:
Handed quot ISO 9001 Worldwide EPTT System Certification quot, quotInternational EPTT Credit AAA Ceritifacte quot , quot Swiss SGS Certificate quot, Legendary Manufacturer in EPTT EPTT Market quot, quotFamous Brand of ZheJiang Province quot, quotNon-public Scientific and Technological EPTTrprise in ZheJiang Province quot, quotNational Higher and EPTT-tech EPTTrprise quot, quotTOP 50 in EPTT Equipment Sector quot quot2011 HangEPTT Engineering and Technological R ampD CEPTTr quot and so on.

3. FAQ

Q:Are you a trading business or manufacturer?
A: HangEPTT EPTT Travel Co., Ltd beforehand was a Condition-owned XiHu (West Lake) Dis.ngguang Mold Manufacturing unit, a point out-owned army EPTT EPTTrprise estabEPTTd in 1965. It finished reform in 2002. Because reform, EPTT has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed speedily. It took the direct in passing ISO9001 Global EPTT Program Certificate and International EPTT Credit history AAA Certification in 2004, and Swiss SGS Certificate in 2009. It has received these kinds of titles as quotIconic Brand name in EPTT EPTT Business quot, quotFamous Manufacturer of ZheJiang Province quot, quotNon-public Scientific and Technological EPTTrprise in ZheJiang Province quot, quotNational High and EPTT-tech EPTTrprise quot, and quotTope 50 in EPTT Gear Business quot successively

Q:Where do you base?
A: We are in HangEPTT,ZheJiang ,EPTT. We have two factories,EPTT manufacturing unit is in XiHu (West Lake) Dis.hu (West Lake) Dis. district,HangEPTT,EPTT and the aged one particular is in CHangEPTT District,HangEPTT,EPTT.

Q:What kinds of EPTT can you make for us?
A:Principal products of our company: JWB-X series mechanical repeatedly variable EPTT, RV sequence worm EPTT EPTT, B/JXJ cycloidal pin EPTT velocity EPTT, NCJ sequence EPTT EPTT, and R, F K, S sequence helical-tooth EPTT (SEW), much more than one hundred types and hundreds of specifications.

Q:What are the application of the EPTT?
A:EPTT are commonly utilized in ceramic, EPTT, foods, metallurgy, beer amp consume, printing and dyeing, textile, petrochemical engineering, warehouse EPTT, wood-operating EPTT, environmental defense gear, printing and EPTT, pharmacy, and leather-based. EPTT are marketed in some nations around the world and locations, this kind of as Europe, The us, and SouthEPTT Asia, and it possesses dozens of distributors and after-sale support agents.

Q:What is the materials you use?

A1: EPTT EPTT human body ( For the RV series worm EPTT Dimension thirty~90)

A2: Solid iron(For the RV sequence worm EPTT, Dimensions one hundred ten-150, For the NCJ amp F/R/S/K series helical EPTT EPTT)

Our manufacturing unit (ZheJiang EPTT Push Co., Ltd.) is a huge and renowned 6S stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPTT manufacturing unit with all around 380 personnel because 1965 . We export to South Asia, SouthEPTT Asia, Africa, Center EPTT, South The united states, North America, Europe…and many others. We provide EPTT to SIEMENS,ABB,SACMI,BUHLER,MODENA,EPTT…and many others. Sincerely hope to establish a earn-acquire company romantic relationship with you.

Expecting to chat about much more information with you !

Ideal Wishes

  in Ottawa Canada  sales   price   shop   near me   near me shop   factory   supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Ottawa Canada  sales   price   shop   near me   near me shop   factory   supplier Hollow Shaft Flange Mounted Helical Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler